SWANS / HiVi Sounding & Outdoor Speaker
Like all SWANS-components the speakers of the IC series have been developed for best sound performance. Robust, free of resonance and UV-light-resistant due to Dura-ABS housing ensures also outdoors for an appropriate long-term stability.
The grids and fixtures are made of weatherproof coated aluminum.
Entirely stainless steel was used.
Only the tweeters display, untypical Swans, some minor compromises.
Because of the weather resistant abilities, ferro-fluid-cooled 25 mm light metal calottes had to be used.
VA4-OS
4” 2-way Indoor/Outdoor Speaker
Woofer: 4 ” Aluminum cone, rubber surround, 18.5oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeter: 25mm Aluminum dome, Ferro-fluid cooled, Ferrite magnet, wide dispersion
Crossover: Phonalic PCB board, 6dB woofer section, 12dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 65Hz- 20KHz
Sensitivity: 86dB
Recommended amplifier power: 10-60 watts
Impedance: 8 ohm
VA5-OS
5.25” 2-way Indoor/Outdoor Speaker
Woofer: 5.25” Aluminum cone, rubber surround, 18.5oz Magnet, 1" voice coil, bumped back plate
Tweeter: 25mm Aluminum dome, Ferro-fluid cooled, Ferrite magnet, wide dispersion
Crossover: Phonalic PCB board, 6dB woofer section, 12dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 60Hz- 20KHz
Sensitivity: 87dB
Recommended amplifier power: 10-80 watts
Impedance: 8 ohm
VA6-OS
6.5” 2-way Indoor/Outdoor Speaker
Woofer: 6.5” Aluminum cone, rubber surround, 18.5oz Magnet, 1" voice coil, bumped back plate
Tweeter: 25mm Aluminum dome, Ferro-fluid cooled, Ferrite magnet, wide dispersion
Crossover: Phonalic PCB board, 6dB woofer section, 12dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 50Hz- 20KHz
Sensitivity: 88dB
Recommended amplifier power: 10-125 watts
Impedance: 8 ohm
VA8-OS
8” 2-way Indoor/Outdoor Speaker
Woofer: 8 ” Aluminum cone, rubber surround, 21.8oz Magnet, 1.5" voice coil, bumped back plate
Tweeter: 25mm Aluminum dome, Ferro-fluid cooled, Ferrite magnet, wide dispersion
Crossover: Phonalic PCB board, 6dB woofer section, 12dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 40Hz- 20KHz
Sensitivity: 87dB
Recommended amplifier power: 10-150 watts
Impedance: 8 ohm